SOLID WOOD AVAILABLE IN STOCK FOR PROCESSING REQUESTED FURNITURE AND SELLING

Description:

Thin-veined in oil timber, smaller than young timber. Small ray with thin density, big and fine fiber without bent, cracked, termite, wood-worm, salt waterproof . Average weight of timber
- Density : 0.650 - 0.700
- Horizontal - stretching force of fiber : 32 Kg/cm2
- Lengthwise pressing of fiber : 417 Kg/cm2
- Bend : 1.253 Kg/cm2                                                                                              

- Paint: UV

More info:

Floorings, decking, decking tile and wooden panel are made from Laos pine, Vietnam Pine, Acacia, Pyinkado, Pomu ( Hinoki), Takkyan ( Asian Walnut ), Narra Padauk, Oak, Beech, ...with wide range of products from Solid flooring, Finger joint (UNI) flooring, Finger Joint Laminate flooring(FJL), Bangkirai decking, Acacia decking tile and Vietnam Pine Finger Joint Panel, window, door Jamb ( scantling), engineered wood flooring.
1.Wooden flooring:
Size: 14/15/18 mm x 90/120/150 mm x 300/450/600/750/900/1050/1200/1500/1820mm
A - Grade: The face shall be practically free of defects- no sap wood/ no heart wood/ no blue stain/ and no crack. A grade admits some small healthy knots with a max. diameter of 5.4 mm, with an allowance of 2 knots every running meter for 90mm wide and below. 3 knots are allowed for 120 mm wide and above. Uniform of color with small limited character marks.
B ?Grade : The face may contain small streaks, burls, slight imperfections, black lines, black colored knots and tight knots which do not exceed 2.45mm, with an allowance of 4 knots every running meter for 90mm wide and below. 6 knots are allowed for 120 mm wide and above. Knots should be repaired. In principle free of sapwood. . More color variation allowed within the parcel.
C ?Grade : The face may contain sapwood, big streaks, burls, imperfections, and knots which do not exceed 3.54mm in diameter. No pin worm hole is allowed. C- grade allows colored repaired knots. Sapwood is allowed for max. 30% of the width and 30% of the height. Sapwood should be repaired.
The quality of ABC Grade:
KD: 12%
Less than 2 mm bending over 1000mm running meter Cupping is not allowed.
Tolerance on length: +/- 1 mm
Tolerance on thickness: +/- 0.1mm ( 15 thick and less), +/- 0.2mm ( 18 thick and less )
Wood species: Pyinkado, Narra Padauk, Takkyan, Hinoki, Oak, Laos Pine
Packing: Nylon, Carton and Pallet

2.Acacia decking tile
Size: 24x500x500 mm ( T x W x L)
Size of Lamella : 12x50x500 mm ( T x W x L)
Structure : Acacia decking tile is made from 9 surfaced lamellas and 3 bottom lamellas and are matched to each other with glue, screws and nails.
8-12% kiln dried
Quality:
1.Surface quality:
- A side is the front ?view of the product. B side is the side view of the product. C side is the bottom side view of the product.
- Sapwood is not allowed on the A and B side .
- Diameter of dead knots on the side A and B is not exceeded 10mm. Dead knot on C side is not over 25 mm.
- All dead knots are fill out with pasta ( wood flour mixed with glued ), same color with product?s color.
- No rotten, decay, blue stain, no bowing.
Processing quality:
- Allowed tolerance for lamellas in width and thickness: +/-0.1mm.
- Product?s surface must be treated with sandpaper, to be clean and clear and polished with oil.
- All lamellas must be bevel ?edge with radius of 2 mm.
Packing: Nylon, Carton and Pallet

3.Decking
Size: 20/30x105x2700/3000mm
Grade A. One side free of defect. No crack, no cupping, no knot, no blue stain, no sapwood, no pinhole. One face grooves for non slip protection, Pencil round chamfer the long corner.
KD : 25%
Wood species: Bangkirai ( Yellow Balau ), Laos Pine
Packing: Nylon, Carton and Pallet

4.Pine Finger Joint Panel ( FJL Board )
Size: 18/24/33/36/38x300/610/915/1220x2300/2440/3640/4200
KD: 12%
Grade A: No crack, no pinhole, no blue stain, no knot, lamella width 45mm
Grade B, C: No crack, no pin hole, blue stain are allowed, knot allowed to be repaired.
Wood species: Vietnam Pine, Acacia, Pomu
Packing: Nylon, Carton and Pallet

5. 3 layers window scantling ( 3 layers )
Size : 72mm x 86mm x 5900/6000mm
KD : 12%
Grade A : No crack, no pinhole, no blue stain, no knot, lamella width 45mm
Grade B, C : No crack, no pinhole, blue stain are allowed, knot allowed to be repaired, lamella width 40-45 mm
Wood species : Vietnam Pine, Acacia, Pomu
Packing: Nylon, Carton and Pallet